周口附近想过夜电话联系

Set as home page | Add to collection | Traditional Chinese
24-Hour Hour Hotline:
0517-86936880
home page > Product Center > Liquid level instrument series

contact us / Contact Us

  • Address: Jiangsu Industrial Park
  • mobile phone: fifteen billion three hundred and fifty-eight million six hundred and sixty-one thousand eight hundred and eighty
  • Fax: 0517-86936880
  • Email: yijiayibiao@163.com

Magnetic level gauge

 Yj-uhz magnetic flap liquid level gauge is yijiahao

Jinhu Yijia Instrument Co., Ltd YJ-UHZ type Magnetic level gauge It is composed of body, flap box (composed of red and white magnetic flap), float, flange cover, etc. it is used for liquid level measurement of various liquid containers. It can be used in high temperature, explosion-proof, anti-corrosion, food and beverage occasions, as local display or remote display and control of liquid level. YJ-UHZ type Magnetic level gauge It can measure the liquid level safely and reliably under the conditions of high temperature, high pressure, high viscosity and strong corrosivity with high sealing and anti leakage. There is no blind area in the whole process of measurement, the display is eye-catching, the reading is intuitive, and the measurement range is large. Equipped with liquid level alarm and control switch, the upper and lower limit alarm and control of liquid level or limit can be realized YJ Series liquid level transmitter can change the liquid level. Converting boundary signal into two wire system 4~20mADC It can realize remote detection, indication, recording and control.

 

Yj-uhz type Magnetic level gauge Application range:

Yj-uhz type Magnetic level gauge Widely used in electric power, petroleum, chemical industry, metallurgy, environmental protection, shipbuilding, construction, food and other industries in the production process of liquid level measurement and control.

 

Yj-uhz type Magnetic level gauge Measurement principle:
 Structural schematic diagram of magnetic flap level gauge


Magnetic level gauge The flap box outside the main body is driven by the float inside the main body (with directional magnetic source, developed according to different media and pressure) to turn over and display red and white colors, and indicate different liquid level heights with the movement of the float. There is a striking scale on the left side of the indicator to make the liquid level indication more clear.

 Magnetic coupling schematic diagram of magnetic flap level gauge  

Yj-uhz type Magnetic level gauge Product features:

1. It is suitable for the liquid level measurement of the liquid medium in the container. Besides the field display, it can be transmitted remotely 4~20mA Electric signal and liquid level controller can output switch signal.

2. The display direction can be changed according to the user's requirements.

3. The measurement range is large, not limited by the height of the container.

4. Therefore, the device is completely sealed and reliable.

5. It has the advantages of simple structure, convenient installation and easy maintenance.

6. Corrosion resistant, explosion-proof.

 

Yj-uhz type Magnetic level gauge Technical parameters:

1. Measuring range( mm ): three hundred nineteen thousand
two
Medium density( g/cm3 ): zero point five one zero nine zero two
three
Medium viscosity: ≤0.0203Pa.S
four
Working temperature ℃: -40 three hundred and fifty
five
Pressure level( MPa ): ≤32
six
Measurement accuracy( mm ): ≤±10
seven
Installation mode: side mounted, top mounted and bottom mounted  
eight
Protection level: IP65
nine
Explosion proof grade: ib Ⅱ cT4 (intrinsically safe type) d Ⅱ BT4 (flameproof)  
ten
Transmission mode: four 20mA Or switching value  
eleven
Interface flange: PN4.0   DN25   HG20593 (side mounted)  
PN1.0
  DN100   HG20593 (top mounted and bottom mounted) can be customized according to the needs of users.

Installation form

Side mounted

Top mounted

Installation spacing
(
measuring range )

500,800,1100,1400,1700,
2000,2500,3000,3500,4000,
4500,5000,5500,6000mm

500,800,1100,1400,1700,
2000,2500,3000mm

working pressure

0.6,1.6,2.5,4.0MPa

0.6,1.6,2.5MPa

Medium density

≥0.5g/cm 3

≥0.76g/cm 3

Connecting flange

stainless steel

flange 20-40(D N 20 P N 4.0) 
(GB9119-88)

flange 200-25(D N 200 P N 2.5) 
(GB9119-88)

ABS

flange 20-10(D N 20 P N 1.0) (GB9119-88)

flange 200-6(D N 200 P N 0.6) 
(GB9119-88)

Main material

ABS( working pressure 0.6MPa) 1Cr18Ni9T

Medium temperature

-40 ~100 (ABS:-40 ~80 )

ambient temperature

-40 ~+70

Indication error

±10mm

Medium viscosity

≤ 1st(10 -4 m/s)

Upper and lower limit switch  
output

one Control sensitivity :10mm 
two
Output contact capacity : AC220V2A 
three
Contact life : 5 × 10 4

Electric remote continuous display

one accuracy : ± 1.5% 
two
Output load : 750 
three
output signal : 0~10mA output ,220VAC Power Supply  
4~20mA
output ,24VDC Two line system  
four
Explosion proof features ia
CT4 Intrinsically safe

 

Yj-uhz type Magnetic level gauge Product selection:

YJ-UHZ

 

Magnetic flap

 

0- Side mounting

Measurement type

 

1- Top mounting

 

2- Install bottom

 

3- Side roof installation

 

4- Side bottom installation

 

 

0- Double sided board

Display mode

 

 

1- Single panel

 

 

2- Single band luminous type

 

 

3-LED Display type

 

 

 

0- No remote transmitter

Remote output

 

 

 

1- Ordinary binding remote transmission (4-20mA)

 

 

 

2- High temperature bundled remote transmission (4-20mA)

 

 

 

 

0- Common type

Explosion proof form

 

 

 

 

G- Flameproof type

 

 

 

 

Z- Intrinsically safe type

 

 

 

 

F- Equipped with safety barrier

 

 

 

 

 

0- No alarm

Alarm form

 

 

 

 

 

S- Go to the police ( close )

 

 

 

 

 

X- Call the police ( open )

 

 

 

 

 

K- Alarm, up and down

 

 

 

 

 

 

A-321

Material selection

 

 

 

 

 

 

B-304

 

 

 

 

 

 

C-316L

 

 

 

 

 

 

D-RPP

 

 

 

 

 

 

E-UPVC

 

 

 

 

 

 

F-304 lining PTFE

 

 

 

 

 

 

 

0- ≤1.0MPa

working pressure

 

 

 

 

 

 

 

1- ≤1.6MPa

 

 

 

 

 

 

 

2- ≤2.5MPa

 

 

 

 

 

 

 

3- ≤4.0MPa

 

 

 

 

 

 

 

4- ≤6.4MPa

 

 

 

 

 

 

 

5- ≤10.0MPa

 

 

 

 

 

 

 

 

A- ≤60℃

working temperature

 

 

 

 

 

 

 

 

B- ≤100℃

 

 

 

 

 

 

 

 

C- ≤120℃

 

 

 

 

 

 

 

 

D- ≤180℃

 

 

 

 

 

 

 

 

E- ≤250℃

 

 

 

 

 

 

 

 

F- ≤350℃

 

 

 

 

 

 

 

 

G- ≤450℃

 

 

 

 

 

 

 

 

 

0- DN10( For side mounting )

Mounting flange

 

 

 

 

 

 

 

 

 

1- DN15( For side mounting )

 

 

 

 

 

 

 

 

 

2- DN20( For side mounting )

 

 

 

 

 

 

 

 

 

3- DN25( For side mounting )

 

 

 

 

 

 

 

 

 

4- DN32( For side mounting )

 

 

 

 

 

 

 

 

 

5- DN80( Suitable for top mounting )

 

 

 

 

 

 

 

 

 

6- DN100( Suitable for top mounting )

 

 

 

 

 

 

 

 

 

7- DN100( Suitable for top mounting )

 

 

 

 

 

 

 

 

 

 

A- No blowdown valve

Selection of blowdown and exhaust

 

 

 

 

 

 

 

 

 

 

B- Blowdown valve

 

 

 

 

 

 

 

 

 

 

C- Exhaust valve

 

 

 

 

 

 

 

 

 

 

D- With drain and vent valve

 

 

 

 

 

 

 

 

 

 

 

V- Vacuum jacketed type ( Frost proof type )

special requirements

 

 

 

 

 

 

 

 

 

 

 

W- Steam jacket type

 

 

 

 

 

 

 

 

 

 

 

X- Heat tracing type

 

 

 

 

 

 

 

 

 

 

 

 

-□□□□

Center distance and depth

 

 

 

 

 

 

 

 

 

 

 

 

 

-□□

Medium density ρ(g/c )

 

Yj-uhz type Magnetic level gauge Order notice:

Please provide the following parameters when ordering:
one
, model and specification;
two
Name of the tested medium: medium density: if you don't know the density, you can tell us the name of the medium and know which kinds of liquid the mixed liquid is composed of;
three
Measuring range of instrument: it can also be called nominal length, that is, the center distance between two flanges;
four
Working pressure: the highest working pressure;
five
Working temperature: measure the lowest and highest temperature of liquid;
six
Material requirements: if you don't know what kind of material to use, you can consult us (generally, we can use what kind of material for liquid);
seven
Whether flange, bolt, nut, valve, sealing washer and other accessories are supplied together;
eight
Flange standard: the nominal diameter of flange, the most used flange is DN20 or DN25
nine
Special requirements: please indicate in detail before ordering, such as whether to bring remote transmission, insulation jacket, etc.

 

Yj-uhz type Magnetic level gauge Quality commitment:
 Magnetic level gauge

Jinhu Yijia Instrument Co., Ltd. is mainly engaged in electromagnetic flowmeter, vortex flowmeter, orifice flowmeter, magnetic flap level gauge, glass plate level gauge and other products, and provides a one-year warranty for all products. In case of product quality problems (excluding wearing parts or accessories) within one year, they shall be repaired free of charge, and technical support shall be provided free of charge.

Consultation hotline 0517-86936880 15358661880

Last article: Glass plate level gauge
Next: no more
Related contents:
 Back to the top